# From draft to submission: how to format and compile your manuscript

> Get a finished draft ready to send: a final cleanup, standard manuscript format, when to use PDF, Word or EPUB, and compiling step by step in WriterMorph.

Source: https://writermorph.com/articles/compile-your-manuscript/

Typing the last sentence of a draft is one milestone. Sending the book out is another, and between the two lie a few jobs that have nothing to do with story: a final cleanup, pages laid out the way the reader expects, and a file in the format they asked for.

This guide follows that path, craft first, then the steps in WriterMorph.

## Before you compile: a last pass

A compiled file holds whatever is in the manuscript, including what you meant to delete. Before you make one:

- **Clear out notes to yourself.** Comments, highlights and bracketed reminders hide easily in a long book.
- **Settle revision marks.** Accept or reject tracked edits so the text is final.
- **Make chapters consistent.** Numbers, titles or both, in the same style everywhere.
- **Mark scene breaks one way,** so they can become one clean separator.
- **Note the word count** of the manuscript you are actually sending; it goes on the title page.
- **Keep a copy of what went out,** so you always know which version an agent read.

In WriterMorph, **Edit › Find › Find by Formatting…** finds **Highlighted Text**, **Comments** or **Revisions** across the **Whole Book**. **Format › Revision Mode** has **Accept Revision Marks in Selection**, **Reject Revision Marks in Selection** and **Remove All Revision Marks**. **Project › Text Statistics & Word Frequency…** counts the **Whole Manuscript**. **File › Back Up › Back Up To…** saves a copy of the whole project wherever you like.

## Standard manuscript format in brief

Standard manuscript format is not how the book will look in print. It is a working layout for the people who will read and edit it: plain pages, room for notes, nothing that competes with the text. These are the widely used conventions:

| Element | Convention |
|---|---|
| Type | 12-point serif such as Times New Roman, or a Courier-style font |
| Line spacing | Double |
| Margins | 1 inch (2.5 cm) all round |
| Paragraphs | First line indented, no extra space between paragraphs |
| Header | Surname / short title / page number |
| Chapters | Each on a new page, starting partway down |
| Scene breaks | A centered # on its own line |
| Title page | Name and contact details, title, byline and word count |
| Word count | Rounded, not exact |

Treat these as defaults: an agency's or publisher's own submission guidelines always come first. If they ask for a different font, another file type or only the opening chapters, do what they ask.

## PDF, Word or EPUB

Each format suits a different reader:

| Format | Send it to | Why |
|---|---|---|
| **PDF** | Agents who ask for PDF, printers, anyone who should see fixed pages | The pages look the same on every screen and printer |
| **Word (.docx)** | Editors, and agents who prefer Word | They can edit, comment and track changes in the file |
| **EPUB** | Beta readers and e-book stores | The text reflows to fit an e-reader, tablet or phone |

You may need all three. Compiling makes each of them from the same manuscript, whenever you need it.

## Compiling in WriterMorph

Choose **Project › Compile…** (⌥⌘E) or **File › Export › Compile…**. Compile Studio opens with settings on the left and a live preview on the right, with chapter, word and page counts. Compiling never changes your text. The full reference is in [Compile and Export](https://writermorph.com/help/compile-and-export/).

### Choose a preset and a format

Start from one of four presets:

- **Manuscript**, for agents and editors: US Letter, Times New Roman 12 pt, double-spaced, 1" margins, "#" scene breaks, chapters on a new page.
- **Paperback**, a print-ready 6 × 9 in trade book in Georgia 11 pt, justified.
- **E-book**, a reflowable EPUB 3 for Kindle, Apple Books and Kobo.
- **Screenplay**, the industry-standard Courier 12 page.

Then choose a format: **PDF** and **Word (DOCX)** with real footnotes, **EPUB 3**, or HTML, Markdown, LaTeX, plain text, RTF, ODT, Word 97–2004, Fountain or Final Draft. Change anything you like and choose **Presets ▾ › Save as Preset…** to keep it; presets can also be exported as files to share between Macs.

![Compile Studio with the Paperback preset: a 6 × 9 in page size, with the title page and the opening of Act I, justified, in the preview.](https://writermorph.com/media/h-compile-paperback.webp "The Paperback preset: the same manuscript as a 6 × 9 in print page.")

### Title page, author and header

Enter the **Title** and **Author**. The author defaults to the name in **Settings › General › Author Information**, which holds your name, pen name and address. With the Manuscript preset, your address details appear on the title page. Running headers follow the preset, "Surname / SHORT TITLE / page" for Manuscript, and a **Short title** under **Metadata** sets the title part.

### Page layout

**Page size** offers office sizes such as US Letter and A4, book trim sizes and **Custom…**; **Margins** can be 0.5, 0.75, 1 or 1.25 inches. Under **Text styling**, **Apply preset** uses the preset's typography, while **Keep source** keeps the fonts and spacing from your editor and takes only the page size and margins. For a submission, **Apply preset** is the safer choice: the pages come out in standard format whatever font you drafted in. If you submit where A4 paper is the norm, change the page size.

![Compile Studio with the Manuscript preset: Page Layout set to US Letter, 1 in margins, Apply preset and Times New Roman, beside the title page and chapter one.](https://writermorph.com/media/p-compile.webp "Page Layout for a submission manuscript: the preset's page size, margins and font.")

### Chapters, scenes and section types

Under **Section Layouts**, WriterMorph reads the binder as three levels: chapters, the sections inside them, and subsections. Choose how titles look, what starts on a new page, how chapters are numbered, and the **Scene separator**: #, * * *, ❧, a blank line or none.

For finer control, every document has a section type: **Part**, **Chapter**, **Scene**, **Heading**, **Front Matter** or **Back Matter**. Set it in the Inspector's **Metadata** tab or the Outliner's **Section Type** column; **Documents › Section Type › Edit Section Types…** adds types of your own. In Compile Studio's **Section Types** section you design each one: its title, with a prefix such as `Chapter <$n>` numbered 1, 2, 3 or One, Two, Three; whether it starts a new page; and whether the first paragraph is indented.

![The Section Types window over Manuscript Mode: the six built-in types, from Part to Back Matter, and a field to add your own.](https://writermorph.com/media/h-sectiontypes.webp "Section types: each kind of document gets its own layout when you compile.")

### Front matter and what goes in

**Front matter** and **Back matter** take a folder or document and place it at the start or end, without chapter numbers; a **Copyright page** and **Dedication** each get their own page. You can also include a **Title page**, **Synopsis**, **Notes**, **Comments**, line numbers and images, and a **Table of contents** for HTML and EPUB. For a clean submission, leave comments and notes out. When an editor works in Word, **Revision marks as Word tracked changes** turns your Revision Mode edits into insertions and deletions.

Under **Contents**, choose the **Entire book**, the **Current selection**, the **Current folder** or a **collection**, and tick documents in the checklist. That is how you answer a request for a partial: select the opening chapters and compile only those. Documents with **Include in compile** turned off, and research material, stay out automatically. **Replacements** are find-and-replace rules applied only to the compiled file, handy for a placeholder name, while the manuscript stays as it is.

### Check the preview, then compile

The preview shows real pages for PDF and a web preview for other formats; view one page, a continuous scroll or two pages side by side. Look at the title page, the first chapter opening, a scene break and the last page, then click the compile button, which names your format (**Compile PDF…**, for example), and save the file.

Once the settings are right, save them as a preset. The next request, whether a full manuscript in Word or three chapters as a PDF, then takes a minute: choose the preset, choose what to include, check the preview and compile.
