# Moving from Scrivener to WriterMorph: what comes across and where to find it

> Bring a .scriv project into WriterMorph: what the import reads, where the binder, corkboard, snapshots and compile are, and what is new to learn.

Source: https://writermorph.com/articles/moving-from-scrivener/

If you have written a book in Scrivener, your work lives in a binder: chapters and scenes in order, a synopsis on every index card, notes beside the text and a compile setup for the finished file. WriterMorph is built for the same kind of long writing. The parts you use every day are there under familiar names, and a whole Scrivener project comes across in one step.

This guide covers the import, where to find the tools you already know, and what works differently.

## How to import a Scrivener project

The import adds your Scrivener project to the book of a WriterMorph project, so begin with one open. For an empty project, choose **File › New Project…** (⇧⌘N) and pick **Blank**.

1. Open Manuscript Mode with **View › Manuscript Mode** (⌃⌘M).
2. Choose **File › Import Files › Scrivener Project (.scriv)…**.
3. Select your `.scriv` project.

WriterMorph reads the Draft folder (its folders, texts, synopses and notes) and the Research folder, and adds them to the book in a new folder named after the project. Importing never changes your original files: the Scrivener project on your disk stays exactly as it was.

## What the import brings in

The [Importing](https://writermorph.com/help/importing/) help lists what happens to each part of a Scrivener project:

| In the Scrivener project | In WriterMorph |
|---|---|
| The Draft folder: folders, texts, synopses and notes | Added to the book, in a new folder named after the project |
| The Research folder | Read as well; PDFs, images, media files and web archives become research items |
| Documents left out of compile | Still left out of compile |
| Headings | Headings |
| Inline footnotes | Footnotes |
| Inline annotations | Comments |
| Hidden style codes | Not shown in the imported text |
| The trash | Not imported |

Research items stay outside the manuscript, so they are never compiled. If you would rather have your chapters at the top level of the binder than inside the new folder, select them and choose **Documents › Move To › Top Level**.

## Where your usual tools are

Most of Manuscript Mode will look familiar. Here is where to find the tools Scrivener users look for first:

| In Scrivener | In WriterMorph |
|---|---|
| Binder, corkboard and outliner | The same three views of one structure, with drag and drop between them: **Editor** (⌘1), **Corkboard** (⌘2) and **Outliner** (⌘3) |
| Scrivenings | **Combined Pages** (⌘4): several documents edited as one text |
| Inspector | **View › Inspector** (⌥⌘I): synopsis, notes, label, status, keywords, custom properties, snapshots and comments |
| Composition Mode | **Composition Mode** (⌃⌥⌘F), plus Dactylo, the typewriter |
| Split editor and Quick Reference | Vertical and horizontal splits, **Lock in Place**, and **Navigate › Open Quick Reference** (⌥⌘Y) |
| Snapshots and Revision Mode | Snapshots (⌘5), five revision colors, version history and tracked changes in Word files |
| Project and session targets | **Project › Show Project Targets** (⇧⌘T), with a deadline and writing days |
| Linguistic Focus, Text Statistics, Name Generator | All three, plus word frequency and readability |
| Section Types and Compile | Section types, section layouts and Compile Studio (⌥⌘E), with a page-by-page preview |
| Scriptwriting mode | Script Mode (⌘8), with Fountain and Final Draft import and export |

![Combined Pages in Manuscript Mode: Act I is selected in the binder and its seven scenes run on as one continuous text in the editor.](https://writermorph.com/media/h-ms-combined.webp "Combined Pages, the counterpart to Scrivenings: all of Act I in one editor.")

A few more things worth knowing in Manuscript Mode. The order of the binder is the order of the book, and the order Compile follows. Right-click a document for **Include in Compile**, label and status. Collections group documents without moving them, and a saved search becomes a collection that stays up to date. **Documents › Set as Templates Folder** gives the character sheets and scene outlines you reuse a home of their own, and **Project › Project Notes** holds notes that belong to the whole project rather than to one document.

## What works differently

### The canvas and the binder show the same cards

Next to Manuscript Mode, WriterMorph has a Visual Planner: an open canvas where scenes, characters, places and research are cards, grouped under acts and linked by arrows. Press ⌃⌘M to switch between the two. They are views of the same cards, so moving a scene on the canvas moves it in the binder, and renaming a chapter in the binder updates its card. **Navigate › Show Selected Card on Canvas** jumps from a document to its card and highlights it.

![The Visual Planner canvas for The Salt Archive: the Act I card linked to its seven scene cards, each showing a synopsis, status, characters and word count against a target.](https://writermorph.com/media/h-canvas.webp "The same scenes on the canvas, grouped under their act.")

### The Writer Timeline

**View › Writer Timeline** (⌥⌘T) turns your scene cards into story views: a Plot Board with chapters across and plotlines down, a Chronology in story time, a Cast Map, a tension curve and Book Stats. It reads the facts each scene carries, such as point of view, place, beat, tension and story time, which sit above the scene's text. The timeline needs Author mode. Fiction and script templates turn it on; for other projects, turn it on in **Project › Project Settings…** under **Canvas › Writing**, or with the **Author** button in the planner toolbar. The guide to [keeping a novel's timeline straight](https://writermorph.com/articles/novel-timeline/) shows it at work.

![The Writer Timeline's Plot Board: chapters across the top, plotlines down the side, and scene cards showing characters, places, story dates and beats.](https://writermorph.com/media/h-wt-board.webp "The Plot Board: chapters across, plotlines down.")

### One project, one file

A WriterMorph project is a single **.wmorph** file. In Finder it looks like one document; inside, it holds your planners, manuscript text, images, attachments and internal backups. WriterMorph saves automatically shortly after you stop typing, and automatic backups are on from the start: a complete, compressed copy each time you open the project and each time you close it or quit. Your projects live in a library on your Mac, in iCloud Drive or in a folder you choose, with no account. More in [Projects, Files and Backups](https://writermorph.com/help/projects-files-backups/).

### Compiling starts from a preset

Compile Studio opens with four presets, **Manuscript**, **Paperback**, **E-book** and **Screenplay**, and a live preview of the pages. Section types (**Part**, **Chapter**, **Scene**, **Heading**, **Front Matter**, **Back Matter** or your own) decide how each kind of document is laid out. The whole route from draft to finished file is in the guide to [formatting and compiling your manuscript](https://writermorph.com/articles/compile-your-manuscript/).

## Your first hour after the import

1. **Read the binder.** Open the new folder and check that chapters and scenes are in the order you expect. Drag a row to move it.
2. **Check two columns in the Outliner.** Press ⌘3, and in **View › Outliner Options** turn on **Section Type** and **Include in Compile**. A document without a chosen section type takes one from its place in the binder.
3. **Take a snapshot before big changes.** **Documents › Snapshots › Take Snapshot with Title…** (⇧⌘5) saves a named copy of a document, such as "As imported".
4. **Set your targets.** **Project › Show Project Targets** sets a manuscript target and a session target. Add a deadline and your writing days, and WriterMorph can work out the session target for you.
5. **Compile once.** Choose **Project › Compile…** (⌥⌘E), pick the **Manuscript** preset and page through the preview.

Then write a chapter the way you normally would, with the Inspector open or in Composition Mode. A few ordinary sessions will show you where everything is faster than any table, and your Scrivener project stays on your disk, unchanged, the whole time.
